TURNING POINT MASTERGUARD PROPELLER HUB FOR 90-300HP OUTBOARD MOTORS WITH A 4.75" GEARCASE (701 KIT)
700 Series Installation Kits. The Turning Point Masterguard Propeller Hub System enables the end-user to economically carry a spare or different diameter/pitch propeller to suit the days skiing, fishing or cruising activities.
The MasterGuard Hub design utilises shock and vibration absorbing polymers for unmatched dependability.
- Lifetime warranty for engines under 200hp.
- Premium corrosion-resistant brass splines.
- Eliminate hub system vibration & chatter.
- Reduce gear shock & engine/drive damage.
- Reduce prop replacement cost by up to 50%
NOTE: Not applicable with Turning Point’s 10, 20 and 200 Hub Kit series.
NOTE: Motors 200HP and above must use series 700 Hub Kits. Failure to use will void warranty.
Choosing your Turning Point propeller is a two-step process:
- Select the Installation Kit to suit the drive shaft on your outboard. Check the table below for your engine model. If not listed, then see other Turning Point hub kits
- Choose the propeller to suit this hub kit sold separately
| MANUFACTURER | SPLINES | SUITS MODEL | NOTES |
|---|---|---|---|
| Mercury & Mariner | 15 | EFI CT / SeaPro : 90 to150hp / V6 & I6: 135 to 300hp / Verado 135 to 300hp(not HD) / OptiMax: 150, 200, 250hp | Use 701 Super Duty Kit for 200+hp Engines. 115hp ProXS CT Only; For ProXS & Verado w/ 1.25” prop shaft, use Mercury Solid Hub kit with the Turning Point Prop. |
| Mercruiser | 15 | Use 701 Super Duty Kit for 200+hp Engines. If propeller strikes trim tab, replace with Mercury part #822777A1 |
| SKU | 203701 |
|---|---|
| Barcode # | 652480206771 |
| Brand | Turning Point |
| Shipping Weight | 1.5000kg |
TURNING POINT MASTERGUARD HUB KIT 701 MERC/MCRUISER 200HP>
More infoMake 4 payments of $44.00 over 8 weeks and get it now!
Calculate Shipping
TURNING POINT MASTERGUARD PROPELLER HUB FOR 90-300HP OUTBOARD MOTORS WITH A 4.75" GEARCASE (701 KIT)
700 Series Installation Kits. The Turning Point Masterguard Propeller Hub System enables the end-user to economically carry a spare or different diameter/pitch propeller to suit the days skiing, fishing or cruising activities.
The MasterGuard Hub design utilises shock and vibration absorbing polymers for unmatched dependability.
- Lifetime warranty for engines under 200hp.
- Premium corrosion-resistant brass splines.
- Eliminate hub system vibration & chatter.
- Reduce gear shock & engine/drive damage.
- Reduce prop replacement cost by up to 50%
NOTE: Not applicable with Turning Point’s 10, 20 and 200 Hub Kit series.
NOTE: Motors 200HP and above must use series 700 Hub Kits. Failure to use will void warranty.
Choosing your Turning Point propeller is a two-step process:
- Select the Installation Kit to suit the drive shaft on your outboard. Check the table below for your engine model. If not listed, then see other Turning Point hub kits
- Choose the propeller to suit this hub kit sold separately
| MANUFACTURER | SPLINES | SUITS MODEL | NOTES |
|---|---|---|---|
| Mercury & Mariner | 15 | EFI CT / SeaPro : 90 to150hp / V6 & I6: 135 to 300hp / Verado 135 to 300hp(not HD) / OptiMax: 150, 200, 250hp | Use 701 Super Duty Kit for 200+hp Engines. 115hp ProXS CT Only; For ProXS & Verado w/ 1.25” prop shaft, use Mercury Solid Hub kit with the Turning Point Prop. |
| Mercruiser | 15 | Use 701 Super Duty Kit for 200+hp Engines. If propeller strikes trim tab, replace with Mercury part #822777A1 |
| SKU | 203701 |
|---|---|
| Barcode # | 652480206771 |
| Brand | Turning Point |
| Shipping Weight | 1.5000kg |
