TURNING POINT MASTERGUARD PROPELLER HUB FOR 90-300HP OUTBOARD MOTORS WITH A 4.75" GEARCASE (502 KIT)
500 Series Installation Kits. The Turning Point Masterguard Propeller Hub System enables the end-user to economically carry a spare or different diameter/pitch propeller to suit the days skiing, fishing or cruising activities.
The MasterGuard Hub design utilises shock and vibration absorbing polymers for unmatched dependability.
- Lifetime warranty for engines under 200hp.
- Premium corrosion-resistant brass splines.
- Eliminate hub system vibration & chatter.
- Reduce gear shock & engine/drive damage.
- Reduce prop replacement cost by up to 50%
NOTE: Not applicable with Turning Point’s 10, 20 and 200 Hub Kit series.
NOTE: Motors 200HP and above must use series 700 Hub Kits. Failure to use will void warranty.
Choosing your Turning Point propeller is a two-step process:
- Select the Installation Kit to suit the drive shaft on your outboard. Check the table below for your engine model. If not listed, then see other Turning Point hub kits
- Choose the propeller to suit this hub kit sold separately
| MANUFACTURER | SPLINES | SUITS MODEL |
|---|---|---|
| Evinrude & Johnson | 15 | V4 with V6 large Gearcase: 100hp commercial, 120hp ('85),130hp ('95-'96), 140hp ('85), Pleasure ('95+): 115hp, 130hp / H.O. (includes E-TEC H.O.): (25" shaft) 90, 115, 135, 150, 200, 225, 250hp E-TEC (includes pontoon series - not for E-TEC G2): (25" shaft) 90hp, 115hp, 130hp ('09-'10), 135hp to 300hp / V6: 135hp to 250hp / V8: 250hp to 300hp |
| Honda | 15 | Cobra 800: 3.0 to 7.5L / King Cobra: 454, 502 / Sea Drive: 2.0 to 4.0L |
| SKU | 203502 |
|---|---|
| Barcode # | 652480200519 |
| Brand | Turning Point |
| Shipping Weight | 1.5000kg |
TURNING POINT MASTERGUARD HUB KIT 502 OMC/COBRA/KING COBRA
More infoMake 4 payments of $33.00 over 8 weeks and get it now!
Calculate Shipping
TURNING POINT MASTERGUARD PROPELLER HUB FOR 90-300HP OUTBOARD MOTORS WITH A 4.75" GEARCASE (502 KIT)
500 Series Installation Kits. The Turning Point Masterguard Propeller Hub System enables the end-user to economically carry a spare or different diameter/pitch propeller to suit the days skiing, fishing or cruising activities.
The MasterGuard Hub design utilises shock and vibration absorbing polymers for unmatched dependability.
- Lifetime warranty for engines under 200hp.
- Premium corrosion-resistant brass splines.
- Eliminate hub system vibration & chatter.
- Reduce gear shock & engine/drive damage.
- Reduce prop replacement cost by up to 50%
NOTE: Not applicable with Turning Point’s 10, 20 and 200 Hub Kit series.
NOTE: Motors 200HP and above must use series 700 Hub Kits. Failure to use will void warranty.
Choosing your Turning Point propeller is a two-step process:
- Select the Installation Kit to suit the drive shaft on your outboard. Check the table below for your engine model. If not listed, then see other Turning Point hub kits
- Choose the propeller to suit this hub kit sold separately
| MANUFACTURER | SPLINES | SUITS MODEL |
|---|---|---|
| Evinrude & Johnson | 15 | V4 with V6 large Gearcase: 100hp commercial, 120hp ('85),130hp ('95-'96), 140hp ('85), Pleasure ('95+): 115hp, 130hp / H.O. (includes E-TEC H.O.): (25" shaft) 90, 115, 135, 150, 200, 225, 250hp E-TEC (includes pontoon series - not for E-TEC G2): (25" shaft) 90hp, 115hp, 130hp ('09-'10), 135hp to 300hp / V6: 135hp to 250hp / V8: 250hp to 300hp |
| Honda | 15 | Cobra 800: 3.0 to 7.5L / King Cobra: 454, 502 / Sea Drive: 2.0 to 4.0L |
| SKU | 203502 |
|---|---|
| Barcode # | 652480200519 |
| Brand | Turning Point |
| Shipping Weight | 1.5000kg |
