Turning Point Hustler 3 Blade Aluminium Propeller - LE Model. Note that a Turning Point propeller hub kit needs to be purchased separately to the propeller.
Turning Point has built their reputation on a relentless focus on engineering the best performing aluminium propellers in the World. Utilising state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as some Stainless Steel Props, and sometimes faster!
Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup give an incredible package - Stainless Performance at Aluminium Prices! Hustler propellers are the only aluminium propeller manufactured with performance enhancing vent holes (selected models only 13” & 14” diameter 15 + Pitch). If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.
The Three Blade Hustler is great for boaters looking to get the most top-end out of their boat and offer excellent bow lifting capabilities.
NOTE: **Motors 200HP and above must use series 700 Hub Kits. Failure to use will void warranty.
Choosing your Turning Point propeller is a two-step process:
- This propeller suits the motors listed below. If your motor is not listed, see other Turning Point propellers.
- Purchase the associated Hub Installation Kit which should suit the drive shaft on your outboard
| PART NUMBER | PITCH | DIAMETER | MODEL # |
|---|---|---|---|
| TPT-202413 | 15" | 15.25" | LE-1515 |
| TPT-202417 | 17" | 14.25" | LE-1417 |
| TPT-202421 | 19" | 14.25" | LE-1419 |
| TPT-202425 | 21" | 14.25" | LE-1421 |
| TPT-202429 | 23" | 14.25" | LE-1423 |
NOTE - PROPELLER HUB KIT IS SOLD SEPARATELY. SEE TABLE BELOW.
This propeller is compatible with the following outboard motors:
| MANUFACTURER | SUITS MODEL | SPLINES | HUB KIT | NOTES |
|---|---|---|---|---|
| Mercury & Mariner | EFI CT / SeaPro : 90 to150hp / V6 & I6: 135 to 300hp / Verado 135 to 300hp (not HD) / OptiMax: 150, 200, 250hp | 15 | 501 & 701 | Use 701 Super Duty Kit for 200+hp Engines. 115hp ProXS CT Only; For ProXS & Verado w/ 1.25” prop shaft, use Mercury Solid Hub kit with the Turning Point Prop. |
| Mercruiser | Alpha One and Bravo One ('83+) | 15 | 501 & 701 | Use 701 Super Duty Kit for 200+hp Engines. If propeller strikes trim tab, replace with Mercury part #822777A1 |
| Evinrude & Johnson | V4 with V6 large gearcase: 100hp commercial, 120hp ('85),130hp ('95-'96), 140hp ('85), Pleasure ('95+): 115hp, 130hp / H.O. (includes E-TEC H.O.): (25" shaft) 90, 115, 135, 150, 200, 225, 250hp E-TEC (includes pontoon series - not for E-TEC G2): (25" shaft) 90hp, 115hp, 130hp ('09-'10), 135hp to 300hp / V6: 135hp to 250hp / V8: 250hp to 300hp |
15 | 502 | |
| Honda | Cobra 800: 3.0 to 7.5L / King Cobra: 454, 502 / Sea Drive: 2.0 to 4.0L | 15 | 502 | |
| Volvo | Penta SX & OMC SX Cobra: (19 spline) ('94+): 3.0 to 8.2L. Not available for Volvo DuoProp or Aquamatic drives | 19 | 504 | |
| Yamaha | 15 | 505 | Use 705 Super Duty Kit for 200+hp Engines. | |
| Honda | BF115D, BF135, BF150, BF200 ('02-'12), BF225 ('02-'12). Use 707 Super Duty Kit for 200+hp Engines | 15 | 507 & 707 | |
| Suzuki | DT 2 stroke: 150hp to 225hp. DF 4 stroke: 150 to 300hp. Use 707 Super Duty Kit for 200+hp Engines | 15 | 507 & 707 | Use Express Mach3 OS series props only |
| Tohatsu | BFT115, BFT150, BFT200, BFT225, BFT250. Use 708 Super Duty Kit for 200+hp Engines | 15 | 508 & 708 | |
| Volvo | Penta AQ; 200, 250, 270, 280, 290. (Use 4 blade props only) | 17 | 510 | |
| Evinrude | E-TEC G2: G2 Series Only: 150 to 300hp | 15 | 511 | |
| Yamaha | 2 and 4 stroke: 150 to 250hp / F300 (V6 only ‘09+) / Sterndrives 3.0 to 7.4L | 15 | 705 | |
| Johnson | 4 stroke: 200hp, 225hp. (Use Express Mach3 OS series props only) | 15 | 707 | |
| Honda | BF200A ('13+), BF225A ('13+), BF250A ('12+). Use 708 Super Duty Kit for 200+hp Engines | 15 | 708 | |
| Yamaha | F350 | 15 | 715 |
| SKU | 202413 |
|---|---|
| Barcode # | 652480101892 |
| Brand | Turning Point |
| Shipping Weight | 5.5000kg |
More infoMake 4 payments of $76.75 over 8 weeks and get it now!
Calculate Shipping
Turning Point Hustler 3 Blade Aluminium Propeller - LE Model. Note that a Turning Point propeller hub kit needs to be purchased separately to the propeller.
Turning Point has built their reputation on a relentless focus on engineering the best performing aluminium propellers in the World. Utilising state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as some Stainless Steel Props, and sometimes faster!
Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup give an incredible package - Stainless Performance at Aluminium Prices! Hustler propellers are the only aluminium propeller manufactured with performance enhancing vent holes (selected models only 13” & 14” diameter 15 + Pitch). If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.
The Three Blade Hustler is great for boaters looking to get the most top-end out of their boat and offer excellent bow lifting capabilities.
NOTE: **Motors 200HP and above must use series 700 Hub Kits. Failure to use will void warranty.
Choosing your Turning Point propeller is a two-step process:
- This propeller suits the motors listed below. If your motor is not listed, see other Turning Point propellers.
- Purchase the associated Hub Installation Kit which should suit the drive shaft on your outboard
| PART NUMBER | PITCH | DIAMETER | MODEL # |
|---|---|---|---|
| TPT-202413 | 15" | 15.25" | LE-1515 |
| TPT-202417 | 17" | 14.25" | LE-1417 |
| TPT-202421 | 19" | 14.25" | LE-1419 |
| TPT-202425 | 21" | 14.25" | LE-1421 |
| TPT-202429 | 23" | 14.25" | LE-1423 |
NOTE - PROPELLER HUB KIT IS SOLD SEPARATELY. SEE TABLE BELOW.
This propeller is compatible with the following outboard motors:
| MANUFACTURER | SUITS MODEL | SPLINES | HUB KIT | NOTES |
|---|---|---|---|---|
| Mercury & Mariner | EFI CT / SeaPro : 90 to150hp / V6 & I6: 135 to 300hp / Verado 135 to 300hp (not HD) / OptiMax: 150, 200, 250hp | 15 | 501 & 701 | Use 701 Super Duty Kit for 200+hp Engines. 115hp ProXS CT Only; For ProXS & Verado w/ 1.25” prop shaft, use Mercury Solid Hub kit with the Turning Point Prop. |
| Mercruiser | Alpha One and Bravo One ('83+) | 15 | 501 & 701 | Use 701 Super Duty Kit for 200+hp Engines. If propeller strikes trim tab, replace with Mercury part #822777A1 |
| Evinrude & Johnson | V4 with V6 large gearcase: 100hp commercial, 120hp ('85),130hp ('95-'96), 140hp ('85), Pleasure ('95+): 115hp, 130hp / H.O. (includes E-TEC H.O.): (25" shaft) 90, 115, 135, 150, 200, 225, 250hp E-TEC (includes pontoon series - not for E-TEC G2): (25" shaft) 90hp, 115hp, 130hp ('09-'10), 135hp to 300hp / V6: 135hp to 250hp / V8: 250hp to 300hp |
15 | 502 | |
| Honda | Cobra 800: 3.0 to 7.5L / King Cobra: 454, 502 / Sea Drive: 2.0 to 4.0L | 15 | 502 | |
| Volvo | Penta SX & OMC SX Cobra: (19 spline) ('94+): 3.0 to 8.2L. Not available for Volvo DuoProp or Aquamatic drives | 19 | 504 | |
| Yamaha | 15 | 505 | Use 705 Super Duty Kit for 200+hp Engines. | |
| Honda | BF115D, BF135, BF150, BF200 ('02-'12), BF225 ('02-'12). Use 707 Super Duty Kit for 200+hp Engines | 15 | 507 & 707 | |
| Suzuki | DT 2 stroke: 150hp to 225hp. DF 4 stroke: 150 to 300hp. Use 707 Super Duty Kit for 200+hp Engines | 15 | 507 & 707 | Use Express Mach3 OS series props only |
| Tohatsu | BFT115, BFT150, BFT200, BFT225, BFT250. Use 708 Super Duty Kit for 200+hp Engines | 15 | 508 & 708 | |
| Volvo | Penta AQ; 200, 250, 270, 280, 290. (Use 4 blade props only) | 17 | 510 | |
| Evinrude | E-TEC G2: G2 Series Only: 150 to 300hp | 15 | 511 | |
| Yamaha | 2 and 4 stroke: 150 to 250hp / F300 (V6 only ‘09+) / Sterndrives 3.0 to 7.4L | 15 | 705 | |
| Johnson | 4 stroke: 200hp, 225hp. (Use Express Mach3 OS series props only) | 15 | 707 | |
| Honda | BF200A ('13+), BF225A ('13+), BF250A ('12+). Use 708 Super Duty Kit for 200+hp Engines | 15 | 708 | |
| Yamaha | F350 | 15 | 715 |
| SKU | 202413 |
|---|---|
| Barcode # | 652480101892 |
| Brand | Turning Point |
| Shipping Weight | 5.5000kg |
