Turning Point Mach3 Express OS 3 Blade Stainless Steel Propeller only - OS Model. Note that a Turning Point propeller hub kit needs to be purchased separately to the propeller.
The New Express Mach3 OS Series of Stainless Steel Propellers are the next step in the evolution of our very popular larger diameter VO series. Our Engineers and Propeller Experts made improvements to the cup, leading and trailing edges, and the aggressive progressive rake and blade geometry that are Turning Point hallmarks. These modifications have produced a propeller with excellent hole shot, impressive bow lift, and class leading cornering.
The Express Mach3 OS is perfectly matched to large horsepower bay boats, offshore center consoles, and high horsepower pontoons/tri-toons. It will fit all 90hp and larger 4.75” gearcase outboards from all engine manufacturers, and Mercury Alpha One and Bravo One, and Volvo Penta SX sterndrives.
Large diameter three-blade propellers offer great mid-range fuel economy in many applications. Whether you are looking to maximise your time on the water, extend your cruise range, or just stretch your fuel dollars, the Express Mach3 OS is a great choice to get the most out of your boat.
NOTE: **Motors 200HP and above must use series 700 Hub Kits. Failure to use will void the warranty.
Choosing your Turning Point propeller is a two-step process:
- This propeller suits the motors listed below. If your motor is not listed, see other Turning Point propellers.
- Purchase the associated Hub Installation Kit which should suit the drive shaft on your outboard.
| PART NUMBER | PITCH / ROTATION | DIAMETER | MODEL |
|---|---|---|---|
| TPT-202898 | 15" / Right | 15.6" | OS-1615 |
| TPT-202899 | 15" / Left | 15.6" | OS-1615-L |
| TPT-202900 | 17" / Right | 15.6" | OS-1617 |
| TPT-202901 | 17" / Left | 15.6" | OS-1617-L |
| TPT-202902 | 19" / Right | 15.6" | OS-1619 |
| TPT-202903 | 19" / Left | 15.6" | OS-1619-L |
| TPT-202904 | 21" / Right | 15.6" | OS-1621 |
| TPT-202905 | 21" / Left | 15.6" | OS-1621-L |
| TPT-202906 | 23" / Right | 15.6" | OS-1623 |
NOTE - PROPELLER HUB KIT IS SOLD SEPARATELY. SEE TABLE BELOW.
This propeller is compatible with the following outboard motors
| MANUFACTURER | SUITS MODEL | SPLINES | HUB KIT | NOTES |
|---|---|---|---|---|
| Mercury & Mariner | EFI CT / SeaPro : 90 to150hp / V6 & I6: 135 to 300hp / Verado 135 to 300hp(not HD) / OptiMax: 150, 200, 250hp | 15 | 501 & 701 | Use 701 Super Duty Kit for 200+hp Engines. 115hp ProXS CT Only; For ProXS & Verado w/ 1.25 prop shaft, use Mercury Solid Hub Kit with the Turning Point Prop. |
| Mercruiser | Alpha One and Bravo One ('83+) | 15 | 501 & 701 | Use 701 Super Duty Kit for 200+hp Engines. If propeller strikes trim tab, replace with Mercury part #822777A1 |
| Evinrude & Johnson | V4 with V6 large gearcase: 100hp commercial, 120hp ('85),130hp ('95-'96), 140hp ('85), Pleasure ('95+): 115hp, 130hp / H.O. (includes E-TEC H.O.): (25" shaft) 90, 115, 135, 150, 200, 225, 250hp E-TEC (includes pontoon series - not for E-TEC G2): (25" shaft) 90hp, 115hp, 130hp ('09-'10), 135hp to 300hp / V6: 135hp to 250hp / V8: 250hp to 300hp |
15 | 502 | |
| Honda | Cobra 800: 3.0 to 7.5L / King Cobra: 454, 502 / Sea Drive: 2.0 to 4.0L | 15 | 502 | |
| Volvo | Penta SX & OMC SX Cobra: (19 spline) ('94+): 3.0 to 8.2L. Not available for Volvo DuoProp or Aquamatic drives | 19 | 504 | |
| Yamaha | 15 | 505 | Use 705 Super Duty Kit for 200+hp Engines. If Express Mach3 OS Prop strikes trim tab, replace with part #6E5-45371-10-00 |
|
| Honda | BF115D, BF135, BF150, BF200 ('02-'12), BF225 ('02-'12). Use 707 Super Duty Kit for 200+hp Engines | 15 | 507 & 707 | |
| Suzuki | DT 2 stroke: 150hp to 225hp. DF 4 stroke: 150 to 300hp. Use 707 Super Duty Kit for 200+hp Engines | 15 | 507 & 707 | Use Express Mach3 OS series props only |
| Tohatsu | BFT115, BFT150, BFT200, BFT225, BFT250. Use 708 Super Duty Kit for 200+hp Engines | 15 | 508 & 708 | |
| Volvo | Penta AQ; 200, 250, 270, 280, 290. (Use 4 blade props only) | 17 | 510 | |
| Evinrude | E-TEC G2: G2 Series Only: 150 to 300hp | 15 | 511 | |
| Yamaha | 2 and 4 stroke: 150 to 250hp / F300 (V6 only ‘09+) / Sterndrives 3.0 to 7.4L | 15 | 705 | |
| Johnson | 4 stroke: 200hp, 225hp. (Use Express Mach3 OS series props only) | 15 | 707 | |
| Honda | BF200A ('13+), BF225A ('13+), BF250A ('12+). Use 708 Super Duty Kit for 200+hp Engines | 15 | 708 | |
| Yamaha | F350 | 15 | 715 |
| SKU | 202901 |
|---|---|
| Barcode # | 652480206504 |
| Brand | Turning Point |
| Shipping Weight | 9.9000kg |
More infoMake 4 payments of $358.00 over 8 weeks and get it now!
Calculate Shipping
Turning Point Mach3 Express OS 3 Blade Stainless Steel Propeller only - OS Model. Note that a Turning Point propeller hub kit needs to be purchased separately to the propeller.
The New Express Mach3 OS Series of Stainless Steel Propellers are the next step in the evolution of our very popular larger diameter VO series. Our Engineers and Propeller Experts made improvements to the cup, leading and trailing edges, and the aggressive progressive rake and blade geometry that are Turning Point hallmarks. These modifications have produced a propeller with excellent hole shot, impressive bow lift, and class leading cornering.
The Express Mach3 OS is perfectly matched to large horsepower bay boats, offshore center consoles, and high horsepower pontoons/tri-toons. It will fit all 90hp and larger 4.75” gearcase outboards from all engine manufacturers, and Mercury Alpha One and Bravo One, and Volvo Penta SX sterndrives.
Large diameter three-blade propellers offer great mid-range fuel economy in many applications. Whether you are looking to maximise your time on the water, extend your cruise range, or just stretch your fuel dollars, the Express Mach3 OS is a great choice to get the most out of your boat.
NOTE: **Motors 200HP and above must use series 700 Hub Kits. Failure to use will void the warranty.
Choosing your Turning Point propeller is a two-step process:
- This propeller suits the motors listed below. If your motor is not listed, see other Turning Point propellers.
- Purchase the associated Hub Installation Kit which should suit the drive shaft on your outboard.
| PART NUMBER | PITCH / ROTATION | DIAMETER | MODEL |
|---|---|---|---|
| TPT-202898 | 15" / Right | 15.6" | OS-1615 |
| TPT-202899 | 15" / Left | 15.6" | OS-1615-L |
| TPT-202900 | 17" / Right | 15.6" | OS-1617 |
| TPT-202901 | 17" / Left | 15.6" | OS-1617-L |
| TPT-202902 | 19" / Right | 15.6" | OS-1619 |
| TPT-202903 | 19" / Left | 15.6" | OS-1619-L |
| TPT-202904 | 21" / Right | 15.6" | OS-1621 |
| TPT-202905 | 21" / Left | 15.6" | OS-1621-L |
| TPT-202906 | 23" / Right | 15.6" | OS-1623 |
NOTE - PROPELLER HUB KIT IS SOLD SEPARATELY. SEE TABLE BELOW.
This propeller is compatible with the following outboard motors
| MANUFACTURER | SUITS MODEL | SPLINES | HUB KIT | NOTES |
|---|---|---|---|---|
| Mercury & Mariner | EFI CT / SeaPro : 90 to150hp / V6 & I6: 135 to 300hp / Verado 135 to 300hp(not HD) / OptiMax: 150, 200, 250hp | 15 | 501 & 701 | Use 701 Super Duty Kit for 200+hp Engines. 115hp ProXS CT Only; For ProXS & Verado w/ 1.25 prop shaft, use Mercury Solid Hub Kit with the Turning Point Prop. |
| Mercruiser | Alpha One and Bravo One ('83+) | 15 | 501 & 701 | Use 701 Super Duty Kit for 200+hp Engines. If propeller strikes trim tab, replace with Mercury part #822777A1 |
| Evinrude & Johnson | V4 with V6 large gearcase: 100hp commercial, 120hp ('85),130hp ('95-'96), 140hp ('85), Pleasure ('95+): 115hp, 130hp / H.O. (includes E-TEC H.O.): (25" shaft) 90, 115, 135, 150, 200, 225, 250hp E-TEC (includes pontoon series - not for E-TEC G2): (25" shaft) 90hp, 115hp, 130hp ('09-'10), 135hp to 300hp / V6: 135hp to 250hp / V8: 250hp to 300hp |
15 | 502 | |
| Honda | Cobra 800: 3.0 to 7.5L / King Cobra: 454, 502 / Sea Drive: 2.0 to 4.0L | 15 | 502 | |
| Volvo | Penta SX & OMC SX Cobra: (19 spline) ('94+): 3.0 to 8.2L. Not available for Volvo DuoProp or Aquamatic drives | 19 | 504 | |
| Yamaha | 15 | 505 | Use 705 Super Duty Kit for 200+hp Engines. If Express Mach3 OS Prop strikes trim tab, replace with part #6E5-45371-10-00 |
|
| Honda | BF115D, BF135, BF150, BF200 ('02-'12), BF225 ('02-'12). Use 707 Super Duty Kit for 200+hp Engines | 15 | 507 & 707 | |
| Suzuki | DT 2 stroke: 150hp to 225hp. DF 4 stroke: 150 to 300hp. Use 707 Super Duty Kit for 200+hp Engines | 15 | 507 & 707 | Use Express Mach3 OS series props only |
| Tohatsu | BFT115, BFT150, BFT200, BFT225, BFT250. Use 708 Super Duty Kit for 200+hp Engines | 15 | 508 & 708 | |
| Volvo | Penta AQ; 200, 250, 270, 280, 290. (Use 4 blade props only) | 17 | 510 | |
| Evinrude | E-TEC G2: G2 Series Only: 150 to 300hp | 15 | 511 | |
| Yamaha | 2 and 4 stroke: 150 to 250hp / F300 (V6 only ‘09+) / Sterndrives 3.0 to 7.4L | 15 | 705 | |
| Johnson | 4 stroke: 200hp, 225hp. (Use Express Mach3 OS series props only) | 15 | 707 | |
| Honda | BF200A ('13+), BF225A ('13+), BF250A ('12+). Use 708 Super Duty Kit for 200+hp Engines | 15 | 708 | |
| Yamaha | F350 | 15 | 715 |
| SKU | 202901 |
|---|---|
| Barcode # | 652480206504 |
| Brand | Turning Point |
| Shipping Weight | 9.9000kg |
