Our X-Trail spacers are designed to lift your X-trail up 50mm using your original springs.
When fitting these spacers and using the original coils the ride will be nice and soft.
The spacers bolt on top of the factory strut / Aftermarket strut.
We have also offset the spacers to correct the camber problem that is associated with lifting X-Trails.
It is recommended to still have a wheel alignment after fitting.
Aftermarket struts and coils can be used although not recommended to use with lifted coils as the suspension arms and bushes will be highly strained if too much lift is achieved.
These are designed to fit the T30 model only up to 2007.
Sold as set/pack of 4.
Note: It is only recommended to use strut spacers on standard length struts, if you use longer struts ( aftermarket) then you must check down travel, make sure the cv's do not bind and there are no fouling issues with steering components and no steering components move past there maximum working angles.
For warranty reasons, when fitting a lift kit you should always fill out a "Fitment Form".
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
FAQ / Extra Info
Vehicle Information | |
Lift Height | 0-2 inch|3 inch|4 inch|5 inch |
Spacer Height | 50mm |
SKU | SE-4087 |
---|---|
Barcode # | OEBC523737 |
Brand | Superior Engineering |
Shipping Weight | 5.5600kg |
Shipping Width | 0.220m |
Shipping Height | 0.130m |
Shipping Length | 0.220m |
Our X-Trail spacers are designed to lift your X-trail up 50mm using your original springs.
When fitting these spacers and using the original coils the ride will be nice and soft.
The spacers bolt on top of the factory strut / Aftermarket strut.
We have also offset the spacers to correct the camber problem that is associated with lifting X-Trails.
It is recommended to still have a wheel alignment after fitting.
Aftermarket struts and coils can be used although not recommended to use with lifted coils as the suspension arms and bushes will be highly strained if too much lift is achieved.
These are designed to fit the T30 model only up to 2007.
Sold as set/pack of 4.
Note: It is only recommended to use strut spacers on standard length struts, if you use longer struts ( aftermarket) then you must check down travel, make sure the cv's do not bind and there are no fouling issues with steering components and no steering components move past there maximum working angles.
For warranty reasons, when fitting a lift kit you should always fill out a "Fitment Form".
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
FAQ / Extra Info
Vehicle Information | |
Lift Height | 0-2 inch|3 inch|4 inch|5 inch |
Spacer Height | 50mm |
SKU | SE-4087 |
---|---|
Barcode # | OEBC523737 |
Brand | Superior Engineering |
Shipping Weight | 5.5600kg |
Shipping Width | 0.220m |
Shipping Height | 0.130m |
Shipping Length | 0.220m |