Australian Made and Owned

Our strut spacers are machined from High Tensile 20MNVS Steel and zinc coated to protect against the elements.

Bolted to the top of the strut tower they will provide you approximately 10-15mm of lift.

The ideal solution for fixing the low nose on your D40/NP300 Navara, R51 Pathfinder.

SOLD AS A PAIR.

Note: It is only recommended to use strut spacers on standard length struts, if you use longer struts ( aftermarket) then you must check down travel, make sure the cv's do not bind and there are no fouling issues with steering components and no steering components move past there maximum working angles.

Disclaimer

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.


FAQ / Extra Info

 

Vehicle Information
Lift Height 0-2 inch|3 inch|4 inch|5 inch
Spacer Height 10mm

 

SKU SE-9363
Barcode # OEBC523691
Brand Superior Engineering
Shipping Weight 0.5000kg
Shipping Width 0.150m
Shipping Height 0.030m
Shipping Length 0.150m

Superior Strut Spacers 10mm Lift To Suit Nissan Navara D40/NP300 2015-20/Pathfinder R51 (Pair)

SKU: SE-9363
Sale price
$61.00
PayPal Checkout
4 payments of $15.25

afterpay More info.

Make 4 payments of $15.25 over 8 weeks and get it now!

zipMoney
From $10 / week
Afterpay
4 payments of $15.25
Superior Strut Spacers 10mm Lift Suitable To Suit Nissan Navara D40/NP300 2015-20/Pathfinder R51 (Pair)

Calculate Shipping

Australian Made and Owned

Our strut spacers are machined from High Tensile 20MNVS Steel and zinc coated to protect against the elements.

Bolted to the top of the strut tower they will provide you approximately 10-15mm of lift.

The ideal solution for fixing the low nose on your D40/NP300 Navara, R51 Pathfinder.

SOLD AS A PAIR.

Note: It is only recommended to use strut spacers on standard length struts, if you use longer struts ( aftermarket) then you must check down travel, make sure the cv's do not bind and there are no fouling issues with steering components and no steering components move past there maximum working angles.

Disclaimer

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.


FAQ / Extra Info

 

Vehicle Information
Lift Height 0-2 inch|3 inch|4 inch|5 inch
Spacer Height 10mm

 

SKU SE-9363
Barcode # OEBC523691
Brand Superior Engineering
Shipping Weight 0.5000kg
Shipping Width 0.150m
Shipping Height 0.030m
Shipping Length 0.150m