WARNING: In Nissan Patrol GQ/GU, running Rear Shocks with an Extended Length exceeding 750mm may lead to clearance issues between Superior Superflex Sway Bars and Superior Bolt-On Diff & Pinion Guards. The severity of this clearance issue can vary depending on many factors including Rear Upper & Lower Arm Lengths, Control Arm Positioning, Pinion Alignment & Manufacturing Tolerances in the OE Diff Housing.

_x000D_ _x000D_ _x000D_

Superior Engineering's Stealth Rear Diff Guard is a 100% Bolt-On Underbody Differential Guard designed Suitable For both GQ and GU Nissan Patrols that are fitted with H233B rear diffs.

_x000D_

These are 100% bolt-on protection made from 250 Grade steel in 6mm steel for the ultimate protection of your ring gear.

_x000D_

These guards simply bolt onto your diff housing utilising the supplied hardware.

_x000D_

The Stealth Diff guard uses the supplied bolts and clamp brackets to secure the guard to the Main Axle tube creating very strong Mounting points.

_x000D_

To further add to the Protection, the Diff Guard also has a profile of the diff housing that fits snuggly against the housing to help share the impact load.

_x000D_

Manufactured to sit as close to the original housing as possible there will be sufficient clearance for aftermarket Panhard rods.

_x000D_

There is no other bolt-on Diff Guard on the market that has complete coverage like the Superior Engineering Stealth Diff Guards.

_x000D_

By using Stealth diff guards you know your rear diff can handle anything it impacts.

_x000D_

Finished in a Hardwearing Powder coat and 100% made in Australia.

_x000D_

Sold each.

_x000D_

Note: Will not fit with factory diff lockers.

_x000D_

_x000D_

_x000D_

_x000D_

_x000D_

---

Video Transcription

_x000D_

Hi, I am Mick from Superior Engineering.

_x000D_

Today I have got a GQ Patrol here and I want to show you how easy it is to fit one of our new Stealth diff guards to it.

_x000D_

So this is a Stealth diff guard here Suitable For GQ and GU Patrols.

_x000D_

It's very easy, we've got a bolt that comes through the side here that connects into your radius arm.

_x000D_

And there's another set up here where a couple of bolts go through and actually wraps around the housing.

_x000D_

So we will go ahead now and we'll fit that up and we will show you a completed job.

_x000D_

So as you can see here we've got the diff guard bolted on there nice and secure.

_x000D_

We've got the bolt through the radius arm here, two bolts securing it around the housing.

_x000D_

This things super strong, it's going to protect that diff really good.

_x000D_

For more information jump on our website at www.superiorengineering.com.au