This is a heavy-duty Superior Engineering rear adjustable Panhard Rod Suitable For Toyota LandCruiser 80/105 Series Solid Axle Front (SAF) four-wheel-drive vehicle.
Adjustable Panhard rods are needed when performing any lifts over 3 inches.
They are adjusted so as the axle sits directly underneath the chassis.
These Panhard rods also come fitted with genuine Toyota bushes.
Manufactured from 32mm OD High Tensile Bar.
We use 1 1/4 UNF fine thread Locknuts to ensure they never come undone, 150mm of thread and finished in a corrosion-resistant zinc coating.
"Price is per 1 Panhard Rod only!"
Superior Engineering now includes ITS Seal Technology on internally threaded adjustable suspension linkages, eliminating the ingress of moisture or liquids that can cause corrosion or rust.
By adding a specially machined seal groove and incorporating a hydraulic seal between the locking nuts, the thread and the link, a perfect pressure-tight seal is created.
This patented process (PN-2015101600) is EXCLUSIVE to Superior Engineering's internally threaded items such as tierods, draglinks, Panhard rods and control arms (upper and lower).
Patent Number: 2015101600
Due to shortages in steel supply at this current time, this product may be supplied in either of the finishes shown in the image below.
We are not able to guarantee which finish will be supplied but they are both of the same tensile strength and carry the same warranty.
Disclaimer
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
FAQ / Extra Info
Vehicle Information | |
Lift Height | 0-2 inch|3 inch|4 inch|5 inch|6 inch |
SKU | SE-1847 |
---|---|
Barcode # | OEBC523748 |
Brand | Superior Engineering |
Shipping Weight | 8.1713kg |
This is a heavy-duty Superior Engineering rear adjustable Panhard Rod Suitable For Toyota LandCruiser 80/105 Series Solid Axle Front (SAF) four-wheel-drive vehicle.
Adjustable Panhard rods are needed when performing any lifts over 3 inches.
They are adjusted so as the axle sits directly underneath the chassis.
These Panhard rods also come fitted with genuine Toyota bushes.
Manufactured from 32mm OD High Tensile Bar.
We use 1 1/4 UNF fine thread Locknuts to ensure they never come undone, 150mm of thread and finished in a corrosion-resistant zinc coating.
"Price is per 1 Panhard Rod only!"
Superior Engineering now includes ITS Seal Technology on internally threaded adjustable suspension linkages, eliminating the ingress of moisture or liquids that can cause corrosion or rust.
By adding a specially machined seal groove and incorporating a hydraulic seal between the locking nuts, the thread and the link, a perfect pressure-tight seal is created.
This patented process (PN-2015101600) is EXCLUSIVE to Superior Engineering's internally threaded items such as tierods, draglinks, Panhard rods and control arms (upper and lower).
Patent Number: 2015101600
Due to shortages in steel supply at this current time, this product may be supplied in either of the finishes shown in the image below.
We are not able to guarantee which finish will be supplied but they are both of the same tensile strength and carry the same warranty.
Disclaimer
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
FAQ / Extra Info
Vehicle Information | |
Lift Height | 0-2 inch|3 inch|4 inch|5 inch|6 inch |
SKU | SE-1847 |
---|---|
Barcode # | OEBC523748 |
Brand | Superior Engineering |
Shipping Weight | 8.1713kg |