This is a heavy-duty Superior Engineering front adjustable Panhard Rod Suitable For 79 Series Gen2 (Single Cab) (2016 on) Toyota LandCruiser four-wheel-drive vehicle.
\ \Adjustable Panhard rods are needed when performing any lifts over 3 inches.
\ \They are adjusted so as the axle sits directly underneath the chassis.
\ \These Panhard rods also come fitted with genuine Toyota bushes.
\ \Manufactured from 32mm OD High Tensile Bar.
\ \We use 1 1/4 UNF fine thread lock nuts to ensure they never come undone, 150mm of thread and finished in a corrosion-resistant zinc coating.
\ \"Price is per 1 Panhard Rod only!"
\ \Superior Engineering now includes ITS Seal Technology on internally threaded adjustable suspension linkages, eliminating the ingress of moisture or liquids that can cause corrosion or rust.
\ \By adding a specially machined seal groove and incorporating a hydraulic seal between the locking nuts, the thread and the link, a perfect pressure-tight seal is created.
\ \This patented process (PN-2015101600) is EXCLUSIVE to Superior Engineering's internally threaded items such as tierods, draglinks, Panhard rods and control arms (upper and lower).
\ \ \ \ \ \Patent Number: 2015101600
\ \ \ \\ |
Due to shortages in steel supply at this current time, this product may be supplied in either of the finishes shown in the image below.
We are not able to guarantee which finish will be supplied but they are both of the same tensile strength and carry the same warranty.
SKU | SE-31389 |
---|---|
Barcode # | OEBC559256 |
Brand | Superior Engineering |
Shipping Weight | 6.6800kg |
This is a heavy-duty Superior Engineering front adjustable Panhard Rod Suitable For 79 Series Gen2 (Single Cab) (2016 on) Toyota LandCruiser four-wheel-drive vehicle.
\ \Adjustable Panhard rods are needed when performing any lifts over 3 inches.
\ \They are adjusted so as the axle sits directly underneath the chassis.
\ \These Panhard rods also come fitted with genuine Toyota bushes.
\ \Manufactured from 32mm OD High Tensile Bar.
\ \We use 1 1/4 UNF fine thread lock nuts to ensure they never come undone, 150mm of thread and finished in a corrosion-resistant zinc coating.
\ \"Price is per 1 Panhard Rod only!"
\ \Superior Engineering now includes ITS Seal Technology on internally threaded adjustable suspension linkages, eliminating the ingress of moisture or liquids that can cause corrosion or rust.
\ \By adding a specially machined seal groove and incorporating a hydraulic seal between the locking nuts, the thread and the link, a perfect pressure-tight seal is created.
\ \This patented process (PN-2015101600) is EXCLUSIVE to Superior Engineering's internally threaded items such as tierods, draglinks, Panhard rods and control arms (upper and lower).
\ \ \ \ \ \Patent Number: 2015101600
\ \ \ \\ |
Due to shortages in steel supply at this current time, this product may be supplied in either of the finishes shown in the image below.
We are not able to guarantee which finish will be supplied but they are both of the same tensile strength and carry the same warranty.
SKU | SE-31389 |
---|---|
Barcode # | OEBC559256 |
Brand | Superior Engineering |
Shipping Weight | 6.6800kg |