Australian Made and Owned

Adjustable panhard rods are needed when performing any lifts over 2inches.

They are adjusted so as the axle sits directly underneath the chassis.

These panhard rods also come fitted with genuine Toyota bushes.

Manufactured from 32mm OD High Tensile Bar. we use 1 1/4 UNF fine thread Lock nuts to ensure they never come undone, 150mm of thread and finished in a corrosion resistant zinc coating.

Suitable For V8 TDi and international wide-body variants only

Superior Engineering now includes ITS Seal Technology on internally threaded adjustable suspension linkages, eliminating the ingress of moisture or liquids that can cause corrosion or rust.
By adding a specially machined seal groove and incorporating a hydraulic seal between the locking nuts, the thread, and the link, a perfect pressure tight seal is created.
This patented process (PN-2015101600) is EXCLUSIVE to Superior Engineering's internally threaded items such as tierods, draglinks, panhard rods and control arms (upper and lower).

Patent Number:2015101600



 

Due to shortages in steel supply at this current time, this product may be supplied in either of the finishes shown in the image below.
We are not able to guarantee which finish will be supplied but they are both of the same tensile strength and carry the same warranty.

Disclaimer
Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.

FAQ / Extra Info
Vehicle Information
Lift Height0-2 inch|3 inch|4 inch|5 inch|6 inch
SKU SE-8175
Barcode # OEBC523760
Brand Superior Engineering
Shipping Weight 7.5471kg

Superior Panhard Rod Adjustable Front (V8 and Wide Body Only) (Each)

SKU: SE-8175
In Stock
In stock
Sale price
$306.00
RRP $340.00
Earn 3,060 Outback Rewards Points
SALE ENDS
Sale price
$306.00
RRP $340.00
PayPal Checkout
4 payments of $76.50

afterpay More info.

Make 4 payments of $76.50 over 8 weeks and get it now!

zipMoney
From $10 / week
Afterpay
4 payments of $76.50
Superior Panhard Rod Adjustable Front (V8 and Wide Body Only) (Each)

Calculate Shipping

Australian Made and Owned

Adjustable panhard rods are needed when performing any lifts over 2inches.

They are adjusted so as the axle sits directly underneath the chassis.

These panhard rods also come fitted with genuine Toyota bushes.

Manufactured from 32mm OD High Tensile Bar. we use 1 1/4 UNF fine thread Lock nuts to ensure they never come undone, 150mm of thread and finished in a corrosion resistant zinc coating.

Suitable For V8 TDi and international wide-body variants only

Superior Engineering now includes ITS Seal Technology on internally threaded adjustable suspension linkages, eliminating the ingress of moisture or liquids that can cause corrosion or rust.
By adding a specially machined seal groove and incorporating a hydraulic seal between the locking nuts, the thread, and the link, a perfect pressure tight seal is created.
This patented process (PN-2015101600) is EXCLUSIVE to Superior Engineering's internally threaded items such as tierods, draglinks, panhard rods and control arms (upper and lower).

Patent Number:2015101600



 

Due to shortages in steel supply at this current time, this product may be supplied in either of the finishes shown in the image below.
We are not able to guarantee which finish will be supplied but they are both of the same tensile strength and carry the same warranty.

Disclaimer
Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.

FAQ / Extra Info
Vehicle Information
Lift Height0-2 inch|3 inch|4 inch|5 inch|6 inch
SKU SE-8175
Barcode # OEBC523760
Brand Superior Engineering
Shipping Weight 7.5471kg