This is an adjustable Drop Drag Link Suitable For Toyota Hilux SAF and Toyota 4Runner/Surf (35mm Shorter Standard Steering).

Drop Drag Links are needed when lift kits from 2 inch to 5 inches are fitted.

If a drop drag link is not fitted the drag link will hit the rear u-bolt on the drivers side causing failure of the j-arm.

This particular item is used when moving the diff forwards 35mm to correct the steering.

Other items you may require if moving the diff forwards is an adjustable torque bar and a tail shaft spacer.

PLEASE READ:
Superior Engineering and other Brands of Steering components are replacement items that are in most
cases upgraded to be a stronger better choice than the factory item. The Superior Engineering steering
Components will meet or exceeds the factory specifications of OEM products. Although Superior
Engineering and other brands may be stronger or exceed OEM specifications maintenance must still be
performed on the components to ensure a safe and reasonable life out of the products.
For all steering products, it is recommended to carefully check over the ends, internal and external
threads and on hollow bars inside the rod every service you have on the vehicle or 6 monthly minimum
to ensure nothing is loose or damaged or rusted. It is recommended to ensure no rust has formed on
any steering parts as this may shorten the life or warranty of the product. Due to the harsh
environments such as beach work or general 4wding rust may quickly form on steel steering
components, it is recommended to replace the items if rust is present.
If there is any wear or “play “in the ball joints, Tie rod ends or threads they must also be replaced for
safety.

Due to shortages in steel supply at this current time, this product may be supplied in either of the finishes shown in the image below.
We are not able to guarantee which finish will be supplied but they are both of the same tensile strength and carry the same warranty.