_x000D_ _x000D_

_x000D_

This is a Superior Engineering Bolt-On Coil Tower Brace Kit suitable for the Nissan GQ/GU Patrol Ute and Body Lifted Wagon.

_x000D_

The Superior Engineering Chassis Tower Brace stops the rear coil tower from bending and tearing from the chassis, correcting a weak point in GU and GQ Nissan Patrol suspension design.

_x000D_

Suitable For Ute style and Wagon with a body lift.

_x000D_

The coil tower brace is pressed up with 6mm steel and comes with all the necessary bolts.

_x000D_

Also comes with a Polyurethane anti-chafing brake line plate to protect the brake lines and fittings.

_x000D_

This is a brace kit Suitable For Nissan patrols. Designed to be 100% bolt-on with all bolts included. Simply bolts on top of the towers.

_x000D_

Wagons need a 2-inch body lift to allow for clearance.

_x000D_

Note: Some vehicles may require exhaust modifications to fit this brace. Also due to the placement of brake lines on some vehicles, lines may need to be carefully bent for clearance.

_x000D_ _x000D_

_x000D_

_x000D_

Video Transcription

_x000D_

Hi, I am Mick from Superior Engineering.

_x000D_

And today I am going to talk to you about the GQ and GU coil tower brace that we sell.

_x000D_

This is for the Utes and for if you got a Wagon with a body lift.

_x000D_

So this is pressed up out of eight-millimetre steel.

_x000D_

It comes with the necessary bolts that you need.

_x000D_

And it also comes with this polyurethane plate that sits on top.

_x000D_

Now, this is to protect the brake lines and all the fittings that come up over the top.

_x000D_

So we will go over and check out how these things get fitted now.

_x000D_

Here is a GQ Patrol we're going to put this coil tower brace on.

_x000D_

As you can see this is a light truck. It got nothing really on the back.

_x000D_

A little timber tray. So we can't go and say that these towers are bent because of excessive weight.

_x000D_

Probably it did have some weight at some point, but these towers are just really weak.

_x000D_

The best way to tell, when you look through them the towers have to be actually dead horizontal.

_x000D_

When you actually look through you will see ones up or they are both pointing up usually.

_x000D_

So as you can see here, I have just put a spirit level on top of that coil tower brace.

_x000D_

And if Luke can zoom in across to the other side you can see that bent at least a good forty millimetres on that one tower.

_x000D_

There's not many GU Patrols that we see come in that haven't go bent towers.

_x000D_

So even if your towers aren't bent, I would certainly be putting one of these braces on for a precaution.

_x000D_

Whether it's this style brace we're showing now or whether it's the other wagon brace that we have.

_x000D_

So from here, we'll get this kit fitted in and we'll do a little bit of footage showing how to fit these kits basically.

_x000D_

Ok. So what we've done we have had to fabricate up a bit of a bracket underneath to actually pull the towers down.

_x000D_

You might be able to see that with the video.

_x000D_

We had to weld up to the actual towers and we have pulled them down with a bit of booker rod to tension them nice and straight.

_x000D_

We've had to undo the brake lines up here. That's essential.

_x000D_

Then our tower brace will actually slide in underneath of that.

_x000D_

And from there we have got the plastic/poly bracket goes in under and it will protect all these.

_x000D_

For more information on these coil tower braces and our other wagon tower brace jump online and all you got to do is type in the tower brace in the search bar and it will take you straight to it.