This is a Chassis Brace/Repair Plate Suitable For Toyota LandCruiser 79 Series from Superior Engineering.

_x000D_ _x000D_

Late-model 4wd"s are also particularly prone to bent rear chassis", partly due to the chassis size and thickness and the remarkably high advertised "rated" towing and load capacities. Towing and carrying loads that are not ideally distributed can accelerate cracking and failure, which is made even worse when done over rough or rugged terrain.

_x000D_ _x000D_

Overloaded vehicles are dangerous and unroadworthy, heavy-duty suspensions and load assist airbags will not solve the problem of overloading.

_x000D_ _x000D_

The Superior Engineering range of Weld-on chassis braces, dramatically increase the sectional strength of the chassis in key critical areas. These braces are currently available for a range of vehicles such as – Toyota Hilux Vigo & Revo, Nissan Navara D40 & NP300, Ford Ranger PX2/ Mazda BT50, Mitsubishi ML/MN & MQ Triton, Holden Colorado / Isuzu D-Max, Toyota LandCruiser 79 and many more. Although these are a DIY kit, it is recommended, that any welding to the chassis be performed by a qualified welder and all modification/repairs be certified and approved according to local rules and regulations.

_x000D_ _x000D_

Superior Engineering has done a lot of the hard work for you by having NCOP Engineering "Design Approval" on all of their chassis strengthening plate kits. This means that once correctly fitted, a simple mod plate under the NCOP VSB light-vehicle code can be easily applied.

_x000D_ _x000D_

Weld-on brace kits are often a great alternative if a welded repair of the chassis is being done, or where some preventative measures are being added to a vehicle planning for big loads.

_x000D_ _x000D_

The Flow chart below explains the ideal way to Fit, Inspect and Approve your Superior Engineering Chassis Brace.

_x000D_ _x000D_

_x000D_ _x000D_

NOTE: These braces do not increase the load or towing capacity of the vehicle.

_x000D_ _x000D_

Chassis Brace plates are designed as an aid and are not recommended for vehicles that may be excessively loaded. Vehicles that are loaded beyond the original OE GVM and GCM are advised to have additional chassis reinforcement designed and added Suitable For each particular application.

_x000D_ _x000D_

Please check with your local transport authority about legality before purchasing.

_x000D_ _x000D_

This brace kit requires welding of the brace for correct fitment. This is recommended to be done by a certified welder.

_x000D_ _x000D_