Superior Polyurethane Castor Bushes 3 Degree Suitable For Coil

Superior Engineering Brand of Polyurethane 3 degree castor bushes are Suitable For 3 Inch coil lift kits.

They are a steel outer cased bush to stop the bush from rotating in the castor arm.

Castor bushes need to be pressed into the radius arms, a minimum of an 8-tonne shop press is needed to fit them.

The bushes come with a drawing to align them correctly in the radius arms.

When a lift is performed, the castors have to be changed due to the radius arms being connected to the chassis and the diff. If you do not fit castors correctly, the vehicle will wander on the road and this is a very serious and dangerous combination that may result in the vehicle being the cause of an accident.

It is recommended if you have a 2-inch lift, to fit 2-degree castor bushes.

If you have a 3-inch lift, then you should fit 3-degree castor bushes.

Any more than a 3-inch lift, you should look at castor plates.

Pack of 4.