These Superior Anti-Inversion Extended shackles are made with 15mm pins for the front of the 40/45 Series Toyota LandCruiser 3/69-7/80 models.

Superior Engineering is the only company that utilises a welded pin design to stop the pins from working loose and wearing the shackle plates.

They feature an anti-inversion design to stop the springs being damaged when the shackles are hit into obstacles.

Greasable pins to ensure a comfortable ride that also accept standard bushes and manufactured 2 inches over standard.

NOTE: 3-degree caster wedges should also be purchased and fitted in the front when using Extended shackles.

Sold as a pair.

Video Transcription

Hi, I am Mick from Superior Engineering.

Today I want to show you our new seventy-six series extended shackles.

There is a few great things about these shackles, one is we use ten-millimetre steel.

Standard shackles are only six-millimetre steel, so these are a lot stronger and they really have to be because we are going extended, so they're about two inches longer than factory.

We do an SA5 zinc coating on them, so you can go to the beach or where ever you want to go and they're not going to go rust on you.

We use high tensile eighteen-millimetre pins here so they will take the standard bushes.

Grease nipples we have, so obviously your suspension moves nice and smoothly.

In the back of it, there is an anti-inversion bolt.

Now that bolt there is to actually stop your suspension travelling too far if you back your vehicle upon say a LandCruiser and hit a stump or something there is the opportunity your shackle will go too far and bend your springs.

That will actually stop that happening.