Superior Strut Spacers Suitable For ML/MN Mitsubishi Triton.
Superior Engineering Strut Spacers are machined from High-Quality Aluminium.
Superior Strut Spacers are designed to be bolted to the top of the strut and they will provide you with approximately 45mm of lift.
The Strut Spacers come with their own set of High Tensile Strut studs that are press-fit into place, these studs bolt to your body and your strut will bolt directly to the machined holes in the Strut Spacer body to ensure a perfect fit.
The ideal solution for fixing the low nose on your new 4x4.
The strut spacer is approx 25mm high but will lift the vehicle approx 45-50mm over the axle.
Price is per pair (2).
Note: It is only recommended to use strut spacers on standard length struts, if you use longer struts ( aftermarket) then you must check down travel, make sure the cv's do not bind and there are no fouling issues with steering components and no steering components move past there maximum working angles.
Disclaimer
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
FAQ / Extra Info
Vehicle Information | |
Lift Height | All Heights |
Spacer Height | 45mm |
SKU | SE-19829 |
---|---|
Barcode # | OEBC523733 |
Brand | Superior Engineering |
Shipping Weight | 1.5000kg |
Superior Strut Spacers Suitable For ML/MN Mitsubishi Triton.
Superior Engineering Strut Spacers are machined from High-Quality Aluminium.
Superior Strut Spacers are designed to be bolted to the top of the strut and they will provide you with approximately 45mm of lift.
The Strut Spacers come with their own set of High Tensile Strut studs that are press-fit into place, these studs bolt to your body and your strut will bolt directly to the machined holes in the Strut Spacer body to ensure a perfect fit.
The ideal solution for fixing the low nose on your new 4x4.
The strut spacer is approx 25mm high but will lift the vehicle approx 45-50mm over the axle.
Price is per pair (2).
Note: It is only recommended to use strut spacers on standard length struts, if you use longer struts ( aftermarket) then you must check down travel, make sure the cv's do not bind and there are no fouling issues with steering components and no steering components move past there maximum working angles.
Disclaimer
Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.
Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.
Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.
Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
FAQ / Extra Info
Vehicle Information | |
Lift Height | All Heights |
Spacer Height | 45mm |
SKU | SE-19829 |
---|---|
Barcode # | OEBC523733 |
Brand | Superior Engineering |
Shipping Weight | 1.5000kg |