An all-in-one radio replacement and SWC interface, the innovative new RadioPRO5 comes pre-loaded with OnStar retention, SWC software, navigation based output signals and other features that save time and money during installation.
- Retains OnStar Telematics system
- Retains original steering wheel control functions with the new radio with no additional interface or programming needed
- Retains factory WiFi system
- Retains front and rear park assist
- Retains all warning chimes (chime module included)
- Retains OEM Auxiliary Input
- Data controlled outputs for connection to your navigation radio; speed, reverse and parking brake status output wires
- Data controlled RAP accessory output
- Works right out of the box with most radio brands
- Keeps vehicle data bus intact for service
- Interface can be quickly updated if needed from the PAC website using a PAC-UP USB adapter
Please note, in 2016 vehicle’s with build codes IOA or IOB, the below harness is also required for the install (sold separately)
Part # PACRP5GM52HAR
SKU # 609098820899
Plug & Play | YES – FACTORY CONNECTOR TO BARE WIRES |
---|---|
Vehicle Plug Style | DUAL GM Style Connectors |
Include AUX/USB retention? | YES – AUX Only |
Dual Press Steering Wheel Control Function | YES – Customisable |
Manual Programming Feature | YES – SWC Button remapping via control button |
Retain Parking Sensors? | YES – If parking sensors were part of the OEM Radio this is retained |
Retain Factory Steering Wheel Audio Controls? | YES – Will retain Steering Wheel Audio Controls with Select Aftermarket Radios |
Vehicle Notes | * 2016+ vehicles with build codes IOA or IOB must also use the RP5-GM52-HAR. Build codes can be found on a silver sticker either in the glove box or in the trunk near the spare tyre well. * 2015 + Colorado/Canyon must use Revision 1.1.4 or higher and Vehicle Settings revision 2.0.7 or higher * 2015 + Tahoe/Suburban/Yukon must use Revision 1.1.3 or higher and Vehicle Settings revision 2.0.6 or higher. You must use Interface Updater 2.0 to update an RP5-GM51. * Chevrolet Impala: Not compatible in vehicles with the IO3 RPO code. RPO codes can be found on a silver sticker in the trunk near the spare tire well. * Does not retain RSE system * 2014 Vehicles: Only compatible with 1500 series trucks. 2500 & 3500 series trucks equipped with non-navigation radios must use the RP5-GM31. 2500 & 3500 series trucks equipped with navigation radios must use the RP5-GM32 * Does not retain Bose amplifier. Information on how to bypass the factory amp is included in the instructions * Does not retain steering wheel control backlighting |
Vehicle Make | Vehicle Model | Vehicle Year + Vehicle Chassis Code |
---|---|---|
CHEVROLET | SILVERADO | 2015 - 2018 (THIRD GEN) |
GMC | SIERRA | 2015 - 2018 (THIRD GEN) |
HOLDEN | ASTRA SEDAN | 2017 - 2018 (BL) |
HOLDEN | EQUINOX | 2017 - 2018 (EQ) |
HOLDEN | TRAX | 2017 - 2018 (TJ) |
SKU | PACRP5GM51 |
---|---|
Barcode # | 609098813891 |
Brand | Pac Audio |
Shipping Weight | 1.5000kg |
An all-in-one radio replacement and SWC interface, the innovative new RadioPRO5 comes pre-loaded with OnStar retention, SWC software, navigation based output signals and other features that save time and money during installation.
- Retains OnStar Telematics system
- Retains original steering wheel control functions with the new radio with no additional interface or programming needed
- Retains factory WiFi system
- Retains front and rear park assist
- Retains all warning chimes (chime module included)
- Retains OEM Auxiliary Input
- Data controlled outputs for connection to your navigation radio; speed, reverse and parking brake status output wires
- Data controlled RAP accessory output
- Works right out of the box with most radio brands
- Keeps vehicle data bus intact for service
- Interface can be quickly updated if needed from the PAC website using a PAC-UP USB adapter
Please note, in 2016 vehicle’s with build codes IOA or IOB, the below harness is also required for the install (sold separately)
Part # PACRP5GM52HAR
SKU # 609098820899
Plug & Play | YES – FACTORY CONNECTOR TO BARE WIRES |
---|---|
Vehicle Plug Style | DUAL GM Style Connectors |
Include AUX/USB retention? | YES – AUX Only |
Dual Press Steering Wheel Control Function | YES – Customisable |
Manual Programming Feature | YES – SWC Button remapping via control button |
Retain Parking Sensors? | YES – If parking sensors were part of the OEM Radio this is retained |
Retain Factory Steering Wheel Audio Controls? | YES – Will retain Steering Wheel Audio Controls with Select Aftermarket Radios |
Vehicle Notes | * 2016+ vehicles with build codes IOA or IOB must also use the RP5-GM52-HAR. Build codes can be found on a silver sticker either in the glove box or in the trunk near the spare tyre well. * 2015 + Colorado/Canyon must use Revision 1.1.4 or higher and Vehicle Settings revision 2.0.7 or higher * 2015 + Tahoe/Suburban/Yukon must use Revision 1.1.3 or higher and Vehicle Settings revision 2.0.6 or higher. You must use Interface Updater 2.0 to update an RP5-GM51. * Chevrolet Impala: Not compatible in vehicles with the IO3 RPO code. RPO codes can be found on a silver sticker in the trunk near the spare tire well. * Does not retain RSE system * 2014 Vehicles: Only compatible with 1500 series trucks. 2500 & 3500 series trucks equipped with non-navigation radios must use the RP5-GM31. 2500 & 3500 series trucks equipped with navigation radios must use the RP5-GM32 * Does not retain Bose amplifier. Information on how to bypass the factory amp is included in the instructions * Does not retain steering wheel control backlighting |
Vehicle Make | Vehicle Model | Vehicle Year + Vehicle Chassis Code |
---|---|---|
CHEVROLET | SILVERADO | 2015 - 2018 (THIRD GEN) |
GMC | SIERRA | 2015 - 2018 (THIRD GEN) |
HOLDEN | ASTRA SEDAN | 2017 - 2018 (BL) |
HOLDEN | EQUINOX | 2017 - 2018 (EQ) |
HOLDEN | TRAX | 2017 - 2018 (TJ) |
SKU | PACRP5GM51 |
---|---|
Barcode # | 609098813891 |
Brand | Pac Audio |
Shipping Weight | 1.5000kg |