Remote on-off
The remote on-off eliminates the need for a **** current switch in the input wiring. The remote on-off can ** ******** with a low power switch or by for ******* the engine run/stop switch (see manual).

Adjustable output voltage: can **** be used as a battery charger
*** example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.

All ****** *** short ******* proof and can be paralleled to ******** output current

An unlimited number of units can be connected in parallel.

**** temperature protected

The output current **** reduce at **** ambient temperature.

IP43 protection
**** installed with the screw terminals ******** downwards.

Screw terminals
No ******* tools needed for installation.

Input fuse (not replaceable)
On 12V and 24V input models only

Specifications:

• Input voltage range: 16-35V
• Under voltage shut down: 14V
• Under voltage restart: 15V
• Nominal output voltage: 12,2V
• Output voltage adjust range: 10-15V
• Output voltage tolerance: +/- 0,2V
• Output noise: 2mV rms
• Cont. output current at nominal output ******* and 25°C: 9A
• Maximum output current (** s) at nominal ****** voltage: 12,5A
• Short circuit output current: 39A
• Cont. output power at 25°C: 110W
• Cont. output ***** at 40°C: 85W
• Efficiency: 85%
• Off load current: < 4mA
• Galvanic isolation: 200V dc ******* input, output and case
• Operating *********** range: -20 to +55°C (derate 3% per °C above 40°C)
• Humidity: Max. 95% non-condensing
• DC connection: Screw terminals
• Maximum cable cross-section: 6 mm² AWG10