The MultiPlus, as the name suggests, is a ******** inverter and charger ** *** elegant package. *** **** features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology, plus multiple system integration features. The MultiPlus **** prevent ******** of a ******* AC source, such as a ********* or shore power connection. First, battery charging **** automatically be reduced when otherwise ** overload would occur. The second ***** will boost the output of a generator or shore side supply with power taken from the battery.

In the event of a grid failure, or when shore or ********* power is disconnected, the inverter within the Multi ** automatically activated *** takes over the supply to the connected loads. This happens ** fast (less than 20 milliseconds) that computers and other electronic ********* will continue to operate ******* disruption.
Up to 6 Multis can operate in parallel to achieve higher power output. Three phase or ***** phase operation is also possible. Please check *** datasheets to see which models have paralleling, three phase *** split phase capabilities. 

Monitor and control your MultiPlus and system or systems' locally (LAN) or remotely via the internet from ******** ** the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. ***** is no end to the level ** control, via the required Color Control GX or Venus GX, from adjusting your MultiPlus to setting a Geofence for hire vehicles and more...

Features:

Two AC Outputs- The main output has no break functionality. The MultiPlus takes over the supply ** *** connected loads ** the event of a grid ******* or when shore/generator power is disconnected. This ******* so fast (less than 20 milliseconds) that computers and other electronic equipment **** continue to operate without disruption. *** second ****** is live only when AC is available on the input of the MultiPlus. Loads that should not ********* *** battery, **** a water heater for example *** ** ********* ** this output (second output available on models rated at 3 kVA and more).

Virtually unlimited power thanks to parallel operation- Up to 6 Multis can operate in ******** ** achieve higher power output. *** 24/5000/120 units, *** example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity.

Three phase capability- In addition to parallel connection, three units of the **** model *** be ********** *** three phase output. But that’s not all: up to 6 sets of ***** units can be parallel connected for a huge 75 kW / 90 kVA inverter and more than 2000 Amps ******** capacity.

PowerControl - Dealing with limited generator, shore side or grid power- *** MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore **** supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel a maximum generator or shore ******* can be set. The MultiPlus will then take account of other AC loads and use whatever ** extra for charging, thus ********** the generator or shore supply from being overloaded.

PowerAssist - ******** the capacity of ***** or ********* power- This feature ***** the principle of PowerControl to a further dimension. It allows *** MultiPlus ** supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus **** make sure that insufficient ***** or generator power is *********** *********** for by power from the battery. **** the load reduces, the spare power is used to recharge the battery.

Solar energy: AC power available even during a grid failure- *** MultiPlus can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.

System configuring- 

-In case ** a stand-alone application, if settings have ** be changed, **** can be done in a matter of ******* with a DIP switch setting procedure.

-******** *** three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.

-Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT ***** Chargers *** be configured with Assistants (dedicated software for specific applications).

On-**** Monitoring and control- Several ******* are available: Battery Monitor, Multi Control Panel, Color Control Panel, smartphone ** tablet (********* Smart), laptop or computer (USB or RS232).

Remote ********** and control- Victron Ethernet Remote, ***** GX and *** Color Control Panel. Data can be stored and displayed on *** VRM (Victron Remote Management) website, free of charge.

Remote configuring- When connected to the Ethernet, systems with a Color Control panel can be accessed remotely and settings can be changed.