This Slimline II rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep JK 2 door 2007-2018 including the Slimline II tray (1425mm x 1762mm), the Jeep Extreme Mounting System and a Wind Deflector.

This rugged, sophisticated, high performance, nearly indestructible rack system allows you to quickly remove the Freedom Panels and works with the hard top roof on or with no roof at all

ll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller prep table or 1 larger camp size table).

All Front Runner Racks are backed by a Limited Lifetime Warranty* 

The JK Extreme mounting system bolts to the roll bar with middle and rear brackets. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels and works with the hard top or with no roof at all. Freedom Panels can be quickly and easily removed with rack in place. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hard top itself.

Consisting of:

  • 1 x FAJK003 - Jeep Wrangler JK 2-Door & 5-Door Front Pillar Brackets - by Front Runner 
  • 1 x FAJK004 - Jeep Wrangler JK 2-Door Foot Rails - by Front Runner 
  • 1 x FAJK005 - Jeep Wrangler JK 2-Door Inner Brackets - by Front Runner 
  • 1 x RRSTJ09 - Slimline II Tray - 1425mm(W) X 1762mm(L) - by Front Runner 

 Material used:

  • Black epoxy powder-coated T6 aluminium 
  • 3CR12 Stainless Steel

Approximate Installed Weight 36kg (79lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.

If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.

If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

 

SKU KRJW001T
Barcode # 6009542265049
Brand Front Runner Outfitters
Shipping Weight 42.0000kg
Shipping Width 0.450m
Shipping Height 0.140m
Shipping Length 1.615m
Shipping Cubic 0.101745000m3

Jeep Wrangler JK 2 Door (07-18) Slimline II Extreme Roof Rack Kit

SKU: KRJW001T
Sale price
$2,675.00
PayPal Checkout
4 payments of $668.75

afterpay More info.

Make 4 payments of $668.75 over 8 weeks and get it now!

zipMoney
From $10 / week
Afterpay
4 payments of $668.75
From Front Runner this rugged, sophisticated, high performance, nearly indestructible rack system for your Jeep Wrangler allows you to quickly remove the Freedom Panels and works with the hard top roof on or with no roof at all

Calculate Shipping

Available Rates

Oversized Parcels
FREE

This Slimline II rack kit contains all the components needed to mount the Slimline II cargo carrying rack to a Jeep JK 2 door 2007-2018 including the Slimline II tray (1425mm x 1762mm), the Jeep Extreme Mounting System and a Wind Deflector.

This rugged, sophisticated, high performance, nearly indestructible rack system allows you to quickly remove the Freedom Panels and works with the hard top roof on or with no roof at all

ll Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

These Foot Rails contain 1 opening to access a Front Runner under rack mount table (1 smaller prep table or 1 larger camp size table).

All Front Runner Racks are backed by a Limited Lifetime Warranty* 

The JK Extreme mounting system bolts to the roll bar with middle and rear brackets. This unobtrusive, high performance, nearly indestructible mounting solution allows you to quickly remove the Freedom Panels and works with the hard top or with no roof at all. Freedom Panels can be quickly and easily removed with rack in place. The cargo weight is evenly distributed across the roll bars and body of the jeep, placing zero weight on the hard top itself.

Consisting of:

  • 1 x FAJK003 - Jeep Wrangler JK 2-Door & 5-Door Front Pillar Brackets - by Front Runner 
  • 1 x FAJK004 - Jeep Wrangler JK 2-Door Foot Rails - by Front Runner 
  • 1 x FAJK005 - Jeep Wrangler JK 2-Door Inner Brackets - by Front Runner 
  • 1 x RRSTJ09 - Slimline II Tray - 1425mm(W) X 1762mm(L) - by Front Runner 

 Material used:

  • Black epoxy powder-coated T6 aluminium 
  • 3CR12 Stainless Steel

Approximate Installed Weight 36kg (79lbs)

The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.

If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.

If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

 

SKU KRJW001T
Barcode # 6009542265049
Brand Front Runner Outfitters
Shipping Weight 42.0000kg
Shipping Width 0.450m
Shipping Height 0.140m
Shipping Length 1.615m
Shipping Cubic 0.101745000m3

Tutorial Videos & Buying Guides