HUC003
Rear Drum to Disc Brake Conversion Kit - Ford Ranger PX & Mazda BT-50 UR (Includes wheel bearings)
4WD Brake Conversion for OEM Brakes
Improve stopping distance by up to 34% over OEM drum brake vehicles.*
For many years the automotive industry has known the superior performance of a disc brake over drums. Discs offer better, safer braking, heat and fade resistance, and consistent performance. The result of this is a SHORTER STOPPING DISTANCE in all conditions, but especially when laden.
Features
-
Fully ADR Approved
-
2 Year 40K hydraulic and hardware warranty
-
Straight bolt on fitment
-
Geomet coated, slotted rotors
-
Vehicle bespoke brake calipers
-
Kevlar ceramic low dust brake pads
-
No other changes required
-
Can be fitted with up to 40mm lift kit
*Independent Australian engineering (including electronic stability control) test results proved that at 100km/h the HULK 4x4 rear disc braking system upgrade stopped on average 32m sooner than the original equipment. A fantastic result that enhances load carrying and towing performance. Official test at vehicle GVM+ weight of 3590kg.
ADR Compliance & QLD Engineering Certification
QLD Certificate of Modification #1068531
Note: Change from OEM Spec Brake System Will Require Local Engineer Inspection. Owner Is Responsible For Inspection.
SKU | HUC003 |
---|---|
Barcode # | OEBC533601 |
Brand | Hulk 4x4 |
Shipping Weight | 37.0000kg |
Shipping Width | 0.610m |
Shipping Height | 0.760m |
Shipping Length | 0.540m |
HUC003
Rear Drum to Disc Brake Conversion Kit - Ford Ranger PX & Mazda BT-50 UR (Includes wheel bearings)
4WD Brake Conversion for OEM Brakes
Improve stopping distance by up to 34% over OEM drum brake vehicles.*
For many years the automotive industry has known the superior performance of a disc brake over drums. Discs offer better, safer braking, heat and fade resistance, and consistent performance. The result of this is a SHORTER STOPPING DISTANCE in all conditions, but especially when laden.
Features
-
Fully ADR Approved
-
2 Year 40K hydraulic and hardware warranty
-
Straight bolt on fitment
-
Geomet coated, slotted rotors
-
Vehicle bespoke brake calipers
-
Kevlar ceramic low dust brake pads
-
No other changes required
-
Can be fitted with up to 40mm lift kit
*Independent Australian engineering (including electronic stability control) test results proved that at 100km/h the HULK 4x4 rear disc braking system upgrade stopped on average 32m sooner than the original equipment. A fantastic result that enhances load carrying and towing performance. Official test at vehicle GVM+ weight of 3590kg.
ADR Compliance & QLD Engineering Certification
QLD Certificate of Modification #1068531
Note: Change from OEM Spec Brake System Will Require Local Engineer Inspection. Owner Is Responsible For Inspection.
SKU | HUC003 |
---|---|
Barcode # | OEBC533601 |
Brand | Hulk 4x4 |
Shipping Weight | 37.0000kg |
Shipping Width | 0.610m |
Shipping Height | 0.760m |
Shipping Length | 0.540m |