Toyota Radio Replacement Interface
Make installation of your new aftermarket radio or infotainment system easy in select Toyota & Subaru vehicles with the Plug & Play ConnectPRO Audi radio replacement solution from Stinger Australia
The Radio Replacement Solution
There's nothing worse than loosing your steering wheel control buttons when updating to the latest technology.
The SWI-TY02 from ConnectPRO from Stinger Australia allows easy retention of steering wheel audio control buttons with your new aftermarket radio or infotainment system.
Keep your eyes on the road and less time fumbling for the radio with ConnectPRO.
The Solid Connection
Each ConnectPRO radio replacement solution includes a Plug and Play interface for a easy and solid connection to your existing vehicle harness.
No need to strip back wires or chop off connectors in your vehicle allowing re-installation of your factory radio if ever required.
Feature Packed
The ConnectPRO SWI-TY02 features:
- Retains factory fitted steering wheel audio buttons
- Retains factory reverse camera (SEE NOTES)
Suitable for vehicles with
- 28PIN + 10PIN + 6PIN Toyota Radio Connectors
What Do You Get?
The ConnectPRO SWI-TY02 kit includes
- PAC SWI-RC-1 Interface (See more on the SWI-RC-1 here)
- 28PIN+10PIN+6PIN Toyota Vehicle Plug and Play Harness
- SWI-RC-1 Bare wire Harness
- Instruction Manual
Compatibility Notes
- Phone buttons cannot be retained in all vehicle models (if fitted)
- Does not retain amplified audio system
- Retains factory camera if wiring is found in 28PIN connector ONLY.
Vehicles with 16PIN or 24PIN connectors require additional harnesses
(NOT INCLUDED)
- Designed for use with major branded head units including
Alpine, Clarion, Kenwood, JVC, Pioneer, Sony, Stinger plus more
| Plug & Play | YES – FACTORY CONNECTOR TO STANDARD ISO CONNECTOR |
|---|---|
| Manual Programming Feature | YES – SWC Button remapping via control button |
| Retain Factory Steering Wheel Audio Controls? | YES – Will retain Steering Wheel Audio Controls with Select Aftermarket Radios |
| Retain Factory Amplifier? | NO |
| Retain Parking Sensors? | NO – If vehicle OEM radio was generating the parking sensor tones. If parking sensors are not part of the factory radio, they should not be effected |
| Vehicle Plug Style | 28PIN TOYOTA Style Connector w/ Standard TOYOTA Style Radio Connectors |
| Vehicle Make | Vehicle Model | Vehicle Year + Vehicle Chassis Code |
|---|---|---|
| DODGE | MONACO (Blues Brothers) | 1974 - 1974 (CX7) |
| SUBARU | BRZ | 2017 - 2020 (POST-FACELIFT) |
| SUBARU | FORESTER | 2015 - 2018 (SJ) |
| SUBARU | IMPREZA | 2016 - 2018 (GK-GT) |
| SUBARU | IMPREZA (Inc WRX) | 2015 - 2016 (GP-GJ) |
| SUBARU | LEVORG | 2016 - 2018 (V1) |
| SUBARU | LIBERTY (Inc Outback) | 2015 - 2017 (BN-BS) |
| SUBARU | LIBERTY (Inc Outback) | 2018 - 2020 (BN-BS) |
| SUBARU | WRX (Inc STI) | 2015 - 2018 (VA) |
| SUBARU | XV | 2015 - 2016 (GP Facelift) |
| SUBARU | XV | 2017 - 2021 (GT) |
| TOYOTA | ALPHARD | 2015 - 2017 (AH30 Series) |
| TOYOTA | AURION | 2012 - 2015 (XV50 Series) |
| TOYOTA | AURION | 2015 - 2017 (XV50 Series) |
| TOYOTA | C-HR | 2017 - 2019 (AX10 Series) |
| TOYOTA | CAMRY | 2012 - 2017 (XV50 Series) |
| TOYOTA | COROLLA HATCH | 2013 - 2015 (E180 Series) |
| TOYOTA | COROLLA HATCH | 2015 - 2018 (E180 - E200 Series) |
| TOYOTA | COROLLA SEDAN | 2014 - 2016 (E170 Series) |
| TOYOTA | COROLLA SEDAN | 2017 - 2018 (E170 Series) |
| TOYOTA | FORTUNER | 2015 - 2019 (AN150 - AN160 Series) |
| TOYOTA | HIACE | 2005 - 2019 (H200 Series) |
| TOYOTA | HILUX | 2011 - 2013 (AN10 - AN20 - AN30 Series) |
| TOYOTA | HILUX | 2013 - 2015 (AN10 - AN20 - AN30 Series) |
| TOYOTA | HILUX | 2015 - 2020 (AN120 - AN130 Series) |
| TOYOTA | KLUGER | 2014 - 2019 (XU50 Series) |
| TOYOTA | LANDCRUISER | 2013 - 2015 (200 Series) |
| TOYOTA | LANDCRUISER | 2016 - 2021 (200 Series) |
| TOYOTA | LANDCRUISER PRADO | 2013 - 2017 (150 Series) |
| TOYOTA | LANDCRUISER PRADO | 2017 - 2020 (150 Series) |
| TOYOTA | PRIUS | 2017 - 2019 (XW50 Series) |
| TOYOTA | PRIUS C | 2012 - 2018 (XP130 Series) |
| TOYOTA | PRIUS V | 2012 - 2015 (ZVW40R Series) |
| TOYOTA | PRIUS V | 2015 - 2019 (ZVW40- ZVW41 Series) |
| TOYOTA | RAV4 | 2014 - 2018 (XA40 Series) |
| TOYOTA | TUNDRA | 2014 - 2017 (XK50 Series) |
| TOYOTA | YARIS | 2014 - 2017 (XP130 Series) |
| TOYOTA | YARIS | 2018 - 2019 (XP130 Series) |
| SKU | SWI-TY02 |
|---|---|
| Barcode # | 9342270006636 |
| Brand | ConnectPRO |
| Shipping Weight | 1.5000kg |
Connectpro Swc Interface - Toyota/Subaru 28 Pin
More infoMake 4 payments of $38.74 over 8 weeks and get it now!
Calculate Shipping
Toyota Radio Replacement Interface
Make installation of your new aftermarket radio or infotainment system easy in select Toyota & Subaru vehicles with the Plug & Play ConnectPRO Audi radio replacement solution from Stinger Australia
The Radio Replacement Solution
There's nothing worse than loosing your steering wheel control buttons when updating to the latest technology.
The SWI-TY02 from ConnectPRO from Stinger Australia allows easy retention of steering wheel audio control buttons with your new aftermarket radio or infotainment system.
Keep your eyes on the road and less time fumbling for the radio with ConnectPRO.
The Solid Connection
Each ConnectPRO radio replacement solution includes a Plug and Play interface for a easy and solid connection to your existing vehicle harness.
No need to strip back wires or chop off connectors in your vehicle allowing re-installation of your factory radio if ever required.
Feature Packed
The ConnectPRO SWI-TY02 features:
- Retains factory fitted steering wheel audio buttons
- Retains factory reverse camera (SEE NOTES)
Suitable for vehicles with
- 28PIN + 10PIN + 6PIN Toyota Radio Connectors
What Do You Get?
The ConnectPRO SWI-TY02 kit includes
- PAC SWI-RC-1 Interface (See more on the SWI-RC-1 here)
- 28PIN+10PIN+6PIN Toyota Vehicle Plug and Play Harness
- SWI-RC-1 Bare wire Harness
- Instruction Manual
Compatibility Notes
- Phone buttons cannot be retained in all vehicle models (if fitted)
- Does not retain amplified audio system
- Retains factory camera if wiring is found in 28PIN connector ONLY.
Vehicles with 16PIN or 24PIN connectors require additional harnesses
(NOT INCLUDED)
- Designed for use with major branded head units including
Alpine, Clarion, Kenwood, JVC, Pioneer, Sony, Stinger plus more
| Plug & Play | YES – FACTORY CONNECTOR TO STANDARD ISO CONNECTOR |
|---|---|
| Manual Programming Feature | YES – SWC Button remapping via control button |
| Retain Factory Steering Wheel Audio Controls? | YES – Will retain Steering Wheel Audio Controls with Select Aftermarket Radios |
| Retain Factory Amplifier? | NO |
| Retain Parking Sensors? | NO – If vehicle OEM radio was generating the parking sensor tones. If parking sensors are not part of the factory radio, they should not be effected |
| Vehicle Plug Style | 28PIN TOYOTA Style Connector w/ Standard TOYOTA Style Radio Connectors |
| Vehicle Make | Vehicle Model | Vehicle Year + Vehicle Chassis Code |
|---|---|---|
| DODGE | MONACO (Blues Brothers) | 1974 - 1974 (CX7) |
| SUBARU | BRZ | 2017 - 2020 (POST-FACELIFT) |
| SUBARU | FORESTER | 2015 - 2018 (SJ) |
| SUBARU | IMPREZA | 2016 - 2018 (GK-GT) |
| SUBARU | IMPREZA (Inc WRX) | 2015 - 2016 (GP-GJ) |
| SUBARU | LEVORG | 2016 - 2018 (V1) |
| SUBARU | LIBERTY (Inc Outback) | 2015 - 2017 (BN-BS) |
| SUBARU | LIBERTY (Inc Outback) | 2018 - 2020 (BN-BS) |
| SUBARU | WRX (Inc STI) | 2015 - 2018 (VA) |
| SUBARU | XV | 2015 - 2016 (GP Facelift) |
| SUBARU | XV | 2017 - 2021 (GT) |
| TOYOTA | ALPHARD | 2015 - 2017 (AH30 Series) |
| TOYOTA | AURION | 2012 - 2015 (XV50 Series) |
| TOYOTA | AURION | 2015 - 2017 (XV50 Series) |
| TOYOTA | C-HR | 2017 - 2019 (AX10 Series) |
| TOYOTA | CAMRY | 2012 - 2017 (XV50 Series) |
| TOYOTA | COROLLA HATCH | 2013 - 2015 (E180 Series) |
| TOYOTA | COROLLA HATCH | 2015 - 2018 (E180 - E200 Series) |
| TOYOTA | COROLLA SEDAN | 2014 - 2016 (E170 Series) |
| TOYOTA | COROLLA SEDAN | 2017 - 2018 (E170 Series) |
| TOYOTA | FORTUNER | 2015 - 2019 (AN150 - AN160 Series) |
| TOYOTA | HIACE | 2005 - 2019 (H200 Series) |
| TOYOTA | HILUX | 2011 - 2013 (AN10 - AN20 - AN30 Series) |
| TOYOTA | HILUX | 2013 - 2015 (AN10 - AN20 - AN30 Series) |
| TOYOTA | HILUX | 2015 - 2020 (AN120 - AN130 Series) |
| TOYOTA | KLUGER | 2014 - 2019 (XU50 Series) |
| TOYOTA | LANDCRUISER | 2013 - 2015 (200 Series) |
| TOYOTA | LANDCRUISER | 2016 - 2021 (200 Series) |
| TOYOTA | LANDCRUISER PRADO | 2013 - 2017 (150 Series) |
| TOYOTA | LANDCRUISER PRADO | 2017 - 2020 (150 Series) |
| TOYOTA | PRIUS | 2017 - 2019 (XW50 Series) |
| TOYOTA | PRIUS C | 2012 - 2018 (XP130 Series) |
| TOYOTA | PRIUS V | 2012 - 2015 (ZVW40R Series) |
| TOYOTA | PRIUS V | 2015 - 2019 (ZVW40- ZVW41 Series) |
| TOYOTA | RAV4 | 2014 - 2018 (XA40 Series) |
| TOYOTA | TUNDRA | 2014 - 2017 (XK50 Series) |
| TOYOTA | YARIS | 2014 - 2017 (XP130 Series) |
| TOYOTA | YARIS | 2018 - 2019 (XP130 Series) |
| SKU | SWI-TY02 |
|---|---|
| Barcode # | 9342270006636 |
| Brand | ConnectPRO |
| Shipping Weight | 1.5000kg |
