• Industry-leading 6-year Warranty
• IP65-rated Dustproof & Water-resistant
• Expandable Capacity From 504Wh to 2,116Wh
• Turbo Charging to 100% in 1 Hour
• LiFePO4 Battery with 3,000+ Life Cycles to 80%
• 4 Ways to Recharge (AC/Solar/Car/Lead-acid battery）
• Easy & Remote Control via BLUETTI App

FEATURES

Power Anywhere, On the Road or Sea
Sporting industry-leading Power Lifting technology*, AC60P can deliver max 1,200W from its 600W inverter to power high-wattage resistive appliances such as hair dryers and grils. With 7 versatile outlets, it can power a range of devices timely, like ice-makers, fridges, electric blankets, phones, laptops, and more. Just enjoy the outdoors with the comforts of home.
* Power Lifting Mode allows AC60P to run high-power heating devices up to 1,200W.

Tiny, But Mighty
The AC60P is the world's first IP65-rated portable power station to be water-resistant and dust-proof. Compact at 20.06lbs, it is easy to carry and can provide power anywhere, anytime. From dusty deserts to lakesides, in sunshine or rain, you'll have peace of mind.

Flexible Capacity for Longer Stay
The AC60P packs with the safest LiFePO₄ battery for over 3,000 cycles before reaching 80%. It can be paired with two B80P expansion batteries (806Wh each) for a growing capacity - plenty of power for short trips or long periods away from the grid. Learn about B80P here.

Multiple Charging Ways
Besides fast wall charging, the AC60P supports solar, car, and lead-acid battery charging. With a choice of charging methods, the AC60P is always full-loaded whenever you need it.

Never Run Out of Power
Suitable for various occasions

SPECIFICATIONS

BATTERY INFO
Capacity: 504Wh(28V,18Ah)

Type: LiFePO4 (Lithium Iron Phosphate)

Life Cycles: 3,000+ Cycles to 80% Original Capacity

Shelf-life: Recharge to 80% Every 3-6 Months

Management System: MPPT Controller, BMS, etc

OUTPUT
AC Output: 2 × 230V/2.6A, 600W in total

Inverter Type: Pure Sine Wave

Surge Power: 1,200W

USB-C Port: 1 × 100W Max. (Built-in eMark chip)

USB-A Port: 2 × 5V/3A

12V DC Outlets: 1 × 12V/10A (Car outlet, regulated.)

Wireless Charging Pad: 1 × 15W Max.

INPUT
AC Input: 600W Max.

Solar Input: 200W Max., VOC 12-28V, 8A

Car Input: 12/24V from Cigarette Lighter Port

Max Input: 600W

RECHARGE TIMES
AC Charging Cable (600W Turbo Charging): ≈ 1-1.5 Hours

Solar Panel (s) (200W)::≈ 2.5-3 Hours
(With prime sunshine, ideal orientation and low temperature)

12V/24V Car Outlet (100W/200W): ≈ 4.5-5 Hours / 2.5-3 Hours

GENERAL
Pass-through Charging: Yes

Weight: About 9.1kg / 20.06lbs

Dimensions (LxWxD): 290mm × 205mm × 234mm / 11.42in × 8.07in × 9.21in

Charging Temperature: 0°C - 40°C / 32°F - 104°F

Discharging Temperature:
-20°C - 40°C (-20°C - 30°C: 600W Max.; 30°C - 40°C: 500W Max.)
-4°F - 104°F (-4°F - 86°F: 600W Max.; 86°F - 104°F: 500W Max.)

Storage Temperature: -20°C - 40°C / -4°F - 104°F

Certification: UKCA, PSE, RCM, CE, IP65, UL Standard

Warranty: 6 Years

Optional Accessories

PV120

MP200

FAQS

Q1: Is the AC60P power station waterproof ?
A:No, the AC60P isn't waterproof. However, it has an IP65 rating to protect it from water splashes and dust.

Q2: What does the IP65 rating mean?
A:The IP or Ingress Protection Rating measures how resistant a device is to solids and water. The first digit of the rating indicates the level of protection of the enclosed device against the intrusion of foreign objects, such as dust, tools, or fingers. The second digit represents the protection level against moisture intrusion. And the IP65 rating means that the AC60P is protected from total dust ingress and low-pressure water jets from any direction.

Q3: How fast can I charge the AC60P?
A:The AC60P supports a maximum input of 600W. Plug it into a wall outlet, turn on the Turbo Charging mode on the BLUETTI App, and you can charge it up in 1.2-1.7 hours.

Q4: What's the difference between Silent, Standard, and Turbo Charging modes?
A:These are the AC charging modes of the AC60P. Each mode has a different input power and charging time, as shown in the table below. While the Silent charging mode is the quietest, with a noise level of no more than 45dB.

Q5: What kind of solar panels should I choose for AC60P?
A:Please refer to the following requirements:

1. Total open circuit voltage: 12-28V

2. Max. input power: 200W

3. Equipped with MC4 connectors.

If your panel has an Anderson connector, please purchase Anderson to MC4 cable, separately.

You can click here to buy Anderson to MC4 cable.

Highly Recommended:

1× BLUETTI PV120: ≈ 3.9-4.3 hrs*.

1× BLUETTI PV200: ≈ 2.5-3 hrs*.

* For reference ONLY.

Q6: Why is the charging power often too low?
A:AC60P has a built-in intelligent BMS that automatically adjusts the charging power in response to the battery temperature and SoC, thus protecting the battery and extending its service life.

Q7: Can it charge and discharge at the same time ?
A:Yes.

Q8: How do I know whether my devices will work well with this product?
A:Please evaluate the total constant load of your devices. If it doesn't exceed the Max. output power of AC60P (600W), you can use this power station to run your devices.
Note: Some devices with built-in motor/compressor may start at 2-4 times the rated power, which can easily overload the AC60P.

Q9: What is Power Lifting Mode？
A:In this mode, the AC60P can run high-power heating devices up to 1,200W, such as space heaters, hair dryers, electric irons, etc.
Do NOT use this unit to run an air conditioner or washing machine.

Q10: How long can it run my device ?
A:The AC60P has different running times depending on the device you're using it with. For high-power devices, the running time = Battery capacity × DoD × η ÷ load power. For low-power devices, the running time = Battery capacity × DoD × η ÷ (load power + self-consumption of AC60P).
DoD refers to Depth of Discharge and η is local inverter efficiency.
For AC60P, DoD is 90%, η is 90%, and self-consumption is about 10W.
E.g. If you run a 100W blender light with it, the running time will be:
504Wh × 90% × 90% ÷ (100W+10W) ≈ 3.7 hrs

Note:
1) The formula is NOT suitable for inductive loads with compressors, like refrigerators, air conditioners, etc.
2) The above data is for reference ONLY.

Q11: Can I use or charge AC60P in sub-zero temperatures?
A:You can use the AC60P to power your devices in cold weather, but please avoid recharging it below freezing.
The operating temperature ranges for AC60P are:
Charging: 0℃-40℃/32℉-104℉
Discharging: -20°C～40°C(-20°C～30°C: 600W Max.; 30°C～40°C: 500W Max.)
-4°F～104°F(-4°F～86°F: 600W Max.; 86°F～104°F: 500W Max.)

Q12: Is it possible to replace the built-in battery?
A:No. If the internal battery pack malfunctions or is dead, please contact BLUETTI Customer Service.

Q13: How to store the AC60P when not in use?
A:The AC60P should be stored in a dry and well-ventilated place and recharged to 80% every 3-6 months.

Q14: Can I use the AC60P as a UPS (Uninterruptible Power Supply)?
A:Yes.