Victron solar panels:
Victron solar panels are made using high quality Polycrystalline & Monocrystalline cells. Victron provide a full range of solar panel modules ranging from 20W - 360W. They are designed for charging deep cycle batteries, for example in vehicles and boats, motor homes, caravans, camping, marine or any other systems with a 12V battery or battery bank.
Solar panels can be utilised to extend battery run time when powering multiple accessories. A number of factors that can influence this include: the time of year, weather conditions, battery capacity and how long you run your appliances. It's important to over size your solar array (where space allows) so that on a good day your solar panels will be able to fully charge your batteries and keep your loads running whilst free camping.
*Note the Victron 12V range of solar panels are suitable for Charging 12V battery systems when using a PWM or MPPT Controller. The Victron range of SmartSolar regulators would be best suited based on price and quality.
See more info about the SmartSolar Regulator - Click here
Features:
- Low voltage-temperature coefficient enhances high-temperature operation.
- Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
- 25-Year limited warranty on power output and performance.
- 5-Year Limited warranty on materials and workmanship.
- Sealed, waterproof, multifunctional junction box gives high level of safety.
- High performance bypass diodes minimize the power drop caused by shade.
- Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
- A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
- Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
- Pre wired quick-connect system with PV-ST01 connectors.
*Image for display purposes only
Specifications
|
|
Model
|
SPM041151200
|
Cell type
|
Monocrystalline
|
Number of cells in series
|
36
|
Nominal power (Watts)
|
115
|
Open Circuit Voltage (Volts)
|
23.32
|
Maximum Power Voltage (Volts)
|
19.0
|
Short Circuit Current (Amps)
|
6.61
|
Maximum Power Current (Amps)
|
6.04
|
Power (Max.)
|
115W
|
Temp Range
|
-40 to +85°C
|
Length of cable / connector
|
900mm / MC4
|
Power Tolerance
|
±3%
|
Maximum system voltage
|
1000V
|
Size (LxWxH)
|
1015 x 668 x 30mm
|
Weight
|
8kg
|
Warranty
-Product warranty
|
|
Victron SPM041151200 spec sheet-
Victron SPM041151200 manual-
SKU | SPM041151200 |
---|---|
Barcode # | 8719076047414 |
Brand | Victron |
Shipping Weight | 8.5000kg |
Victron solar panels:
Victron solar panels are made using high quality Polycrystalline & Monocrystalline cells. Victron provide a full range of solar panel modules ranging from 20W - 360W. They are designed for charging deep cycle batteries, for example in vehicles and boats, motor homes, caravans, camping, marine or any other systems with a 12V battery or battery bank.
Solar panels can be utilised to extend battery run time when powering multiple accessories. A number of factors that can influence this include: the time of year, weather conditions, battery capacity and how long you run your appliances. It's important to over size your solar array (where space allows) so that on a good day your solar panels will be able to fully charge your batteries and keep your loads running whilst free camping.
*Note the Victron 12V range of solar panels are suitable for Charging 12V battery systems when using a PWM or MPPT Controller. The Victron range of SmartSolar regulators would be best suited based on price and quality.
See more info about the SmartSolar Regulator - Click here
Features:
- Low voltage-temperature coefficient enhances high-temperature operation.
- Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
- 25-Year limited warranty on power output and performance.
- 5-Year Limited warranty on materials and workmanship.
- Sealed, waterproof, multifunctional junction box gives high level of safety.
- High performance bypass diodes minimize the power drop caused by shade.
- Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
- A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
- Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
- Pre wired quick-connect system with PV-ST01 connectors.
*Image for display purposes only
Specifications
|
|
Model
|
SPM041151200
|
Cell type
|
Monocrystalline
|
Number of cells in series
|
36
|
Nominal power (Watts)
|
115
|
Open Circuit Voltage (Volts)
|
23.32
|
Maximum Power Voltage (Volts)
|
19.0
|
Short Circuit Current (Amps)
|
6.61
|
Maximum Power Current (Amps)
|
6.04
|
Power (Max.)
|
115W
|
Temp Range
|
-40 to +85°C
|
Length of cable / connector
|
900mm / MC4
|
Power Tolerance
|
±3%
|
Maximum system voltage
|
1000V
|
Size (LxWxH)
|
1015 x 668 x 30mm
|
Weight
|
8kg
|
Warranty
-Product warranty
|
|
Victron SPM041151200 spec sheet-
Victron SPM041151200 manual-
SKU | SPM041151200 |
---|---|
Barcode # | 8719076047414 |
Brand | Victron |
Shipping Weight | 8.5000kg |